RTS Series
Series Category: Aluminum Electrolytic Capacitors
Series Type: Snap-In
Series Capacitance Range: 56 - 1500 µF
Series Voltage Range: 200 - 450 VDC
Series Operating Temperature Range: -25 - 105 ºC
Terminal Type: Snap-in
Load Life (in hours):
| 2000 |
Capacitance Change: Within +/- 20% of the initial measured value.
Dissipation Factor (tanδ): Not more than 200% of the initial specified value
Leakage Current: Not more than initial specified value
Useful Life (in hours): 4000
Capacitance Change: Within +/- 30% of the initial measured value.
Dissipation Factor (tanδ): Not more than 300% of the initial specified value
Leakage Current: Not more than initial specified value
Shelf Life (in hours): 1000
Capacitance Change: Within +/- 20% of the initial measured value.
Dissipation Factor (tanδ): Not more than 200% of the initial specified value
Leakage Current: Not more than initial specified value
Leakage Current Formula: After 5 minutes at +20°C application of rated voltage, leakage current is not more than 0.01CV or 1.5mA, whichever is smaller. C: Nominal Capacitance (uF) V: Rated Voltage (V)
Capacitance Tolerance: +/- 20% at 120 Hz, +20°C
Tan or Dissipation Factor
Measurement Frequency: 120Hz, +20°C
| Rated Voltage | 200 | 250 | 400 | 450 |
| Tan Max | 0.15 | 0.15 | 0.15 | 0.20 |
Stability at Low Temperature Table:
| Rated Voltage | 200 | 250 | 400 | 450 |
| Z –25°C / +20°C | 4 | 4 | 4 | 4 |
Frequency Coefficient:
| Frequency > Voltage v | 50/60Hz | 120Hz | 300Hz | 1kHz | 10kHz | ≥ 50kHz |
| ≤ 250 V | 0.8 | 1.00 | 1.17 | 1.32 | 1.45 | 1.5 |
| > 250 | 0.8 | 1.00 | 1.16 | 1.3 | 1.41 | 1.43 |
Temperature Coefficient:
| Temperature ºC | +40 | +55 | +70 | +85 | +105 |
| Coefficient | 2.7 | 2.50 | 2.10 | 1.70 | 1.00 |
Browse parts in this series
Part numbers are listed and sorted by voltage, then capacitance, then case size
Showing 64–72 of 105 results
Part Numbering System Keys
Aluminum Electrolytic Capacitor Part Numbering System
Film Capacitor Part Numbering System